دستگاه تولید پریفرم سیپا Sipa

Sipa Injection Molding

ساخت شرکت:

سیپا ایتالیا

سال ساخت:

۲۰۱۱ میلادی

تعداد قالب:

۳۲ کویته

ساعت کار دستگاه ۴۰۰۰ ساعت می باشد


:Make

Sipa

:Model

PPS300/32

Year of Manufacture

۲۰۱۱

For running 32 cavity preform moulds

with a pitch of up to 72 mm x 172 mm

Used only for 4,000 hours

 In very good condition

 

A new era in the production of PET preforms

XTREME is a rotary platform for manufacturing preform at high productivity and efficiency. With this revolutionary injection-compression molding system, SIPA has taken PET preform production into a new dimension. XTREME permits the highest L/t ratios in the industry, enabling you to produce preforms that are 10% lighter than even the lightest preform produced by conventional injection molding. And with a much faster mold changeover time of only 1 minute per cavity, a much lower injection pressure reducing material stress, AA levels and energy consumption, the possibility to produce two different preforms simultaneously, a ۱۰۰% preform inspection capability, and with a much more compact footprint, XTREME redefines just about every boundary in the industry. Giving you almost unlimited freedom to design and produce extremely light preforms for mineral water and aseptic bottles with the lowest TCO. Extremely efficient, extremely flexible, extremely fast.

Highlights:

  • Lowest TCO in the industry
  • Highest stretch ratio (L/T), design freedom
  • Totally oil free
  • Significantly reduced footprint
  • Reduced material stress due to lower injection pressure: low AA content and  IV drop
  • In line preforms inspection: 100% camera quality control
  • Simultaneous production of two different preforms
  • Less material: 10% lighter preforms without losing any key properties
  • Extremely quick mold changeover (۱ minute per cavity)
  • Main features of extruder unit:
    • Electrically-driven screw extruder motors and motion
    • Pure extrusion process without shooting pot
    • Two extruder sizes available:
      • ۱۲۰ mm extruder (L/D 25) up to 800 Kg/h
      • ۱۴۰ mm extruder (L/D 25) up to 1,200 Kg/h
    • Optimization of plasticizing screw with true continuous rotation to reduce consumptions and AA levels
    • Possibility to use PET recycled flakes up to 50% without any modifications to standard plastification group